NEC Express 5800/320Lc - Manual (Page 217)

5-54 Installing and Using Utilities
Procedure in the ft server utility
1. Select the target component by using the ft server utility.
2. Check the current state of the target component with the LEDs. If the component is
operating, stop the component.
3. Click the [Diagnostics] button in the [Diagnosis Information] on the target component.
The diagnosis result can be confirmed by the LEDs on the target component. The result of
the diagnosis is registered in the event log.
4. Start the component.
Sample screen of ft server utility
[PCI Module]