Northern UTA220/UTA220k - Manual (Page 93)

UTA220/UTA220k
12-17
D-Channel X.25
Table 12-5: Default X.3 Parameters
Parameter Description Default Remarks
1 PAD recall using a
character 1 DLE character (Ctrl P) is the
PAD recall character
2 Echo 1 Enabled
3 Data forwarding
character selection 2 Carriage return character
(0Dh) is the data forwarding
character
4 Idle timer delay
selection 0 Timer = 0 secs
5 Ancillary device
control 2 Flow control of local DTE
device by PAD allowed in data
transfer
6 Control of PAD
service and
command signals 5 Transmit PAD command and
service signals in standard
form
7 Action of PAD on
break from DTE 0 Do Nothing
8 Discard output 0 Normal data delivery
9 Padding after
carriage return 0 No padding after carriage
return
10 Line folding 0 No line folding
11 Binary speed of
DTE - Set by current baud rate
12 Flow control of
PAD by DTE 1 DTE flow control of PAD
allowed
13 Line feed insertion
after carriage
return 5 Insert line feed after carriage
return transmitted to the DTE
and after echo of carriage
returns
14 Padding after line
feed 0 No padding
15 Editing 1 Editing is allowed during data
transfer
16 Character delete 8 Ctrl H (08H of ASCII Character
Table) is the delete character
17 Line delete 24 Ctrl X (18H of ASCII Character
Table) is the line delete
character