Northern UTA220/UTA220k - Manual (Page 135)

UTA220/UTA220k
C-1
AT Command Set
Appendix C
AT Command Set
Table C-1: UTA 220 AT Command Set
Command Description Value
Global Commands: Action
>Tn Test Modes n = 0 End Test
4 2B+D Loopback
>C Control Mode Exit
>Cp Control Mode on Port p p = 0 Control Mode Exit
1 Control Port 1
2 Control Port 2
3 Control Port 3
4 Control Port 4
>F= Reload Global
>Ln Front Panel Lock Level n = 0 Unlocked < default>
1 Option Locked
2 Option/Actions
Locked
>W= Store Global
>V= View Global Parameters G View Global Parameters
C View Directory Numbers, SPIDs,
and TEIs
>Z= Restart Network
%Z1 Restart UTA
Z9 See >Z
&F9 See >F
&W9 See >W
Global Commands: Miscellaneous Configuration
>Fn See >Ln
Global Commands: Switch Configuration
!C0= Switch Type
Changing this parameter
changes all !B, !C parame-
ters to factory default. 0 AT&T 5ESS
1 Northern Telecom DMS-100
2 National ISDN < default>
*Note: "by port" indicates that these switch parameters are associated with a
particular port. However, this does not exclude ports from sharing the same
SPID or TEI.+