Northern UTA220/UTA220k - Manual (Page 89)

UTA220/UTA220k
12-13
D-Channel X.25
*Acknowledgment PAD service signal is transmitted to the local DTE as a carriage return and a
line feed.
Table 12-1: PAD Command Set Summary
Command Description Response
STAT Requests virtual call status of
the DTE ENGAGED or FREE
CLR Disconnects the current virtual
call CLR CONF, CLR ERR, or CLR
DER
RESET Resets the current virtual call Acknowledgment PAD service
signal or ERR *
INT Transmits an interrupt packet Acknowledgment PAD service
signal or ERR *
SET Sets or changes the value of
one or more of the current
parameters Acknowledgment PAD service
signal or ERR or PAR (list of
specified parameters and INV)
*
PAR? Requests display of the current
values of the specified
parameters PAR (list of specified
parameters with their current
values or INV)
SET? Requests the setting or
changing of the current values
of the specified parameters
and display the values after the
setting or changing PAR (list of specified
parameters with their current
values or INV) or ERR
RPAR? Requests the display from the
remote PAD of the current
values of the specified
parameters PAR (list of specified
parameters with their current
values or INV)
RSET? Requests the setting or
changing from the remote PAD
of the current values of the
specified parameters and
displays the values after the
setting or changing PAR (list of specified
parameters with their current
values or INV) or ERR
PROF Loads or Stores the current X.3
profile Acknowledgment PAD service
signal or ERR*
PAD Select
Command
Sets up and establishes a
virtual call COMM, ERR, or CLR xxx (see
PAD Clear Service Signals)