beautypg.com

Interface card removal – Northern UTA220/UTA220k User Manual

Page 28

background image

3-4

UTA220/UTA220k

Getting Started

Note: Ensure that both slide switches on the interface card
are in the same position.

Figure 3-4. V.35 EIA-232 interface Card

Interface Card Removal

The port 1 V.35/EIA-232 interface card must be removed from
the UTA220 to change the DIP switch settings.

Note: Do not remove the port 2 interface card. The port 2 DIP
switch can be accessed without removing the card.