Enable privacy, Enable privacy -26, A-802.1x as well. see – Netopia 3300 User Manual
Page 70
3-26 Firmware User Guide
To enable the Wireless Multimedia custom settings, select diffserv from the pull-down menu.
Enable Privacy
By default, Enable Privacy is set to Off. IT IS STRONGLY RECOMMENDED THAT YOU ENABLE PRIVACY.
•
WPA-PSK: (Wi-Fi Protected Access) The easiest way to enable Privacy on your Wireless network is by
selecting WPA-PSK - (Pre-Shared Key) from the pop-up menu.
Wireless LAN Configuration
Enable Wireless: Yes
SSID: 0271 1000
Block Wireless Bridging: No
Channel... 6
AutoChannel... +------------+
Closed System... +------------+
Wireless Multimedia (WMM)... | Off |
Enable Privacy... | diffserv |
+------------+
Wireless Multiple SSID Setup...
MAC Address Authentication...
Wireless LAN Configuration
Enable Wireless: Yes
SSID: 0271 1000
Block Wireless Bridging: No
Channel... +---------------------------+
AutoChannel... +---------------------------+
Closed System... | Off |
Enable Privacy... | WEP - Manual |
| WEP - Automatic |
| WPA - PSK (Pre-Shared Key)|
| WPA - 802.1x |
+---------------------------+
Wireless Multiple SSID Setup...
MAC Address Authentication...