Changing or deleting a vlan, Changing or deleting a vlan -18 – Netopia 3300 User Manual

Page 62

3-18 Firmware User Guide

•

TOS-Priority – Use any 802.1p priority bits in the VLAN header to prioritize packets within the Gateway’s
internal queues, according to DiffSer v priority mapping rules. See

“Diffser v Options” on page 2-22

for

more information.

•

IPTOS-Promote – Write any 802.1p priority bits into the IP-TOS header bit field for received IP packets on
this por t destined for this VLAN. Write any IP-TOS priority bits into the 802.1p priority bit field for tagged IP
packets transmitted from this por t for this VLAN. All mappings between Ethernet 802.1p and IP-TOS are
made according to a pre-defined QoS mapping policy. See

“Diffser v Options” on page 2-22

for more

information.

Select COMMIT and press Return. Your VLAN settings will be associated with the por t you have selected.

Note:

VLAN changes require a reboot to take effect. See

“Restar ting the System” on page 11-8

Changing or Deleting a VLAN

You can change or delete a VLAN by returning to the VLAN Configuration screen and selecting Display/Change
VLAN or Delete VLAN. In either case, select the VLAN that you want to change or delete from the pop-up menu,
and press Return.

Changing or Deleting an Authentication Server Conﬁguration

You can change or delete a RADIUS or TACACS ser ver profile by returning to the VLAN Configuration screen and
selecting Authentication Server Configuration, then Display/Change Server Profile or Delete Server Profile. In
either case, select the Ser ver Profile that you want to change or delete from the pop-up menu, and press
Return.

VLAN Configuration

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.