Netopia 3300 - Manual (Page 163)

Virtual Private Networks (VPNs) 5-31
Select Output Filter 1 and press Return. In the Change Output Filter 1 screen, set the Protocol Type and
Destination Por t information as shown below.
Select Output Filter 2 and press Return. In the Change Output Filter 2 screen, set the Protocol Type to allow
GRE as shown below.
Change Output Filter 1
Enabled: Yes
Forward: Yes
Call Placement/Idle Reset: No Change
Force Routing: No
Source IP Address: 0.0.0.0
Source IP Address Mask: 0.0.0.0
Dest. IP Address: 0.0.0.0
Dest. IP Address Mask: 0.0.0.0
TOS: 0
TOS Mask: 0
Protocol Type: UDP
Source Port Compare... No Compare
Source Port ID: 0
Dest. Port Compare... No Compare
Dest. Port ID: 5150
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.
Change Output Filter 2
Enabled: Yes
Forward: Yes
Call Placement/Idle Reset: No Change
Force Routing: No
Source IP Address: 0.0.0.0
Source IP Address Mask: 0.0.0.0
Dest. IP Address: 0.0.0.0
Dest. IP Address Mask: 0.0.0.0
TOS: 0
TOS Mask: 0
Protocol Type: GRE
Return/Enter accepts * Tab toggles * ESC cancels.
Enter the packet specific information for this filter.