Netopia 3300 - Manual (Page 49)

System Configuration 3-5
Select Add Exposed Address Range and press Return.
The Exposed Address Range screen appears.
Enter the First and Last Exposed Addresses in dotted-quad format for the range of IP addresses you want to
expose,
Add Exposed Address List
Exposed Address List Name: xposed_list_1
Add Exposed Address Range...
Return/Enter goes to new screen.
Add Exposed Address Range ("xposed_list_1")
First Exposed Address: 0.0.0.0
Last Exposed Address: 0.0.0.0
Protocol... ANY
ADD EXPOSED ADDRESS RANGE CANCEL
Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).