Netopia 3300 - Manual (Page 45)

System Configuration 3-1
Chapter 3
System Configuration
This chapter describes how to use the Telnet-based management screens to access and configure advanced
features of your equipment. You can customize these features for your individual setup. These menus provide a
power ful method for experienced users to set up their Router’s system configuration.
System Configuration Features
The Netopia Router’s default settings may be all you need to configure. Some users, however, require advanced
settings or prefer manual control over the default selections. For these users, Netopia Firmware Version 8.7
provides many advanced system configuration options.
This section covers the following topics:
To access the system configuration screens, select System Configuration in the Main Menu and press Return.
• “IP Setup” on page 3-2 • “Wireless configuration” on page 3-23
• “Filter Sets” on page 3-2 • “Console Configuration” on page 3-35
• “IP Address Ser ving” on page 3-2 • “SNMP (Simple Network Management Protocol)”
on page 3-36
• “Network Address Translation (NAT)” on
page 3-2 • “Security” on page 3-36
• “Stateful Inspection” on page 3-3 • “Upgrade Feature Set” on page 3-36
• “Procedure for Default Installation for ICSA
firewall cer tification of Small/Medium
Business Categor y Module (ADSL Routers)”
on page 3-48 • “Router/Bridge Set” on page 3-37
• “VLAN Configuration” on page 3-11 • “IGMP (Internet Group Management Protocol)” on
page 3-39
• “Date and time” on page 3-22 • “Logging” on page 3-42