Netopia 3300 - Manual (Page 26)

2-10 Firmware User Guide
Multiple Data Link Encapsulation Settings
4. Select Encapsulation Options and press Return.
• If you selected ATMP, PPTP, L2TP, or IPSec, see Chapter 5, “Vir tual Private Networks (VPNs).”
• If you selected PPP or RFC1483, the screen offers different options:
If you are using PPP, when you select Encapsulation Options, the Datalink (PPP/MP) Options screen
appears. (RFC1483 does not require these options and does not offer the menu selection.)
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Encapsulation Type... +--------------+
+--------------+
RFC1483 Mode... | Bridged 1483 |
| Routed 1483 |
+--------------+
IP Profile Parameters...
COMMIT CANCEL
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Encapsulation Type... PPP
Underlying Encapsulation... None
PPP Mode... VC Multiplexed
Encapsulation Options...
IP Profile Parameters...
Interface Group... Primary
COMMIT CANCEL
Configure a new Conn. Profile. Finished? COMMIT or CANCEL to exit.
• If you selected RFC1483, the screen allows you
to choose Bridged 1483 or Routed 1483. • If you selected PPP, the screen allows you to
choose PPPoE or None as the Underlying
Encapsulation.
• If you choose None, the PPP Mode offers the
choice of VC Multiplexed or LLC SNAP.