Netopia 3300 - Manual (Page 15)

Introduction 1-5
Navigating through the Telnet Screens
Use your keyboard to navigate the Netopia Firmware Version 8.7’s configuration screens, enter and edit
information, and make choices. The following table lists the keys to use to navigate through the Telnet screens.
To help you find your way to par ticular screens, some sections in this guide begin with a graphical path guide
similar to the following example:
This par ticular path guide shows how to get to the Network Protocols Setup screens. The path guide represents
these steps:
1. Beginning in the Main Menu, select System Configuration and press Return. The System Configuration
screen appears.
2. Select IP Setup and press Return. The IP Setup screen appears.
To go back in this sequence of screens, use the Escape key.
To... Use These Keys...
Move through selectable items in a screen or pop-up menu Up, Down, Left, and Right Arrow
Set a change to a selected item or open a pop-up menu of
options for a selected item like entering an upgrade key Return or Enter
Change a toggle value (Yes/No, On/Off) Tab
Restore an entr y or toggle value to its previous value Esc
Move one item up Up arrow or Control + O
Move one item down Down arrow or Control + K
Page up Control + A
Page down Control + Z
Display a dump of the device event log Control + E
Display a dump of the WAN event log Control + F
Refresh the screen Control + L
Main
Menu
IP Setup
System
Configuration