Netopia 3300 - Manual (Page 34)

2-18 Firmware User Guide
• The time of day that the connection will Begin At
• The duration of the connection (HH:MM)
• Whether it’s a recurring Weekly connection or used Once Only
• Which connection profile (Conn. Prof.) is used to connect
• Whether the scheduled connection is currently Enabled
The Router checks the date and time set in scheduled connections against the system date and time.
Adding a scheduled connection
To add a new scheduled connection, select Add Scheduled Connection in the Scheduled Connections screen
and press Return. The Add Scheduled Connection screen appears.
Follow these steps to configure the new scheduled connection:
• To activate the connection, select Scheduled Connection Enable and toggle it to On. You can make the
scheduled connection inactive by toggling Scheduled Connection Enable to Off.
• Decide how often the connection should take place by selecting How Often and choosing Weekly or Once
Only from the pop-up menu.
• The Schedule Type allows you to set the exact weekly schedule or once-only schedule.
Options are:
• Forced Up, meaning that this connection will be maintained whether or not there is a demand call on
the line.
• Forced Down, meaning that this connection will be torn down or blocked whether or not there is a
demand call on the line.
• Demand-Allowed, meaning that this schedule will permit a demand call on the line.
Add Scheduled Connection
Scheduled Connection Enable: On
How Often... Weekly
Schedule Type... Forced Up
Set Weekly Schedule...
Use Connection Profile...
ADD SCHEDULED CONNECTION CANCEL
Scheduled Connections dial remote Networks on a Weekly or Once-Only basis.