Netopia 3300 - Manual (Page 236)

8-4 Firmware User Guide
The Datalink (PPP/MP) Options screen appears.
• Data Compression should remain set to Standard LZS.
• Usually, you use PAP Authentication, with a dial-up connection, but you can also use CHAP, or None.
For PAP Authentication, you enter your User Name and Password, and a User Name and Password for
authorization of dial-in connections (if so configured). For CHAP Authentication, you enter a Host Name and
Secret.
Unless other wise instructed, you can leave the other defaults unchanged.
Press Escape.
Datalink (PPP/MP) Options
Data Compression... +------+rd LZS
+------+
Send Authentication... | None |
| PAP |
Send User Name: | CHAP |
Send Password: +------+
Receive User Name:
Receive Password:
Dial on Demand: Yes
PAP-- Password protection is used. Passwords are exchanged in clear text.
Add Connection Profile
Profile Name: Modem Backup
Profile Enabled: Yes
Encapsulation Type... PPP
Encapsulation Options...
IP Profile Parameters...
Interface Group... Backup
Telco Options...
COMMIT CANCEL
Configure a new Conn. Profile. Finished? COMMIT or CANCEL to exit.