Printronix T4204 - Manual (Page 61)

Printing A Configuration
61
5. Press the
3
or
4
key to cycle through the following printout options:
Current*
Factory
Power-Up
All
1-8 customized configurations
6. When the desired option displays, press the ENTER key. The printer
prints the specified configuration. Refer to Figure 4, for a sample
configuration printout.
NOTE: If the configuration you want to print has not been saved, the
following message will display momentarily:
This message indicates that no configuration menu has been saved
under the configuration value you have selected and therefore cannot
be printed. You must either select another configuration to print or
load and then save a configuration to that configuration value first.
CONFIG. DOES NOT
EXIST/Save First