Lists of approved media, Indicators and switches, Host interfacing – Printronix T4204 User Manual
Page 204: Electrical
204
Appendix A
Lists Of Approved Media
For a current list of approved standard media for use in Printronix thermal and
thermal transfer label printers, please call Printronix at (800) 733-1900 or FAX
(714) 368-2354. Further information can be obtained by calling the Printronix
Thermaline Help Desk at (714) 368-2488 or from the Printronix Web Page at
http://www.printronix.com.
Indicators And Switches
Indicator Lights:
ONLINE
Switches:
POWER
Keys:
PAUSE, FEED, CANCEL, TEST, CLEAR, PRT
CONFIG, JOB SELECT, ENTER, UP, DOWN,
PREV, NEXT
Message Display:
2-row 16-characters per row for error messages,
print status, and recalling stored formats
Host Interfacing
1.
Serial RS-232 or RS-422 at 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, or 115200 baud.
2.
Parallel (Centronics compatible) or IEEE 1284 bi-directional.
3.
Coax/Twinax (optional).
4.
Ethernet 10 Base - T (optional)
The RS-232 and RS-422 host interfaces shall have the following
characteristics:
Character Set:
ANSI
®
ASCII character set
Word Length:
Selectable 7-bit or 8-bit data format
Handshaking:
XON/XOFF (in receive mode only) and RTS/DTR
Input Buffer:
Selectable from 1k through 16 kbytes.
Electrical:
Power Source:
115 or 230 VAC 50/60Hz switching power supply.
Circuit Protection
One T6.3-amp, 250V Time-Lag fuse.
Grounding:
Unit must be connected to a properly grounded
receptacle.