Printronix T4204 - Manual (Page 52)

52
Chapter 3 Menu Navigation
Table 1: Key Function Summary - Secondary Control Panel
Key Function
CLEAR If a fault condition exists, pressing this key clears the fault message
and returns the printer to offline mode.
NOTE: If the fault condition is not corrected before pressing CLEAR,
the message reappears when attempting to place the printer
online.
PRT CONFIG Prints the current printer configuration menu settings (offline mode
only).
JOB SELECT Selects a specific printer configuration menu (offline mode only).
ENTER Selects the current value within the printer configuration menu (offline
mode only) and displays an asterisk (*) next to the value. If the ENTER
key is locked, the value will not be selected and an “ENTER SWITCH
LOCKED” message displays for one second, followed by a display of
the previously selected value. Pressing the UP and DOWN keys at the
same time unlocks the ENTER key and permits value selection.
UP (
5
) This key causes the printer to go up one level in the menu structure
(offline mode only).
DOWN (
6
) This key causes the printer to go down one level in the menu structure
(offline mode only).
PREV (
3
) If the menu selection is a value, pressing this key causes the value to
be decremented. If the menu selection is an option, pressing this key
allows selection among options on the current menu level. Holding the
key down causes the key to repeat at about seven times a second
(offline mode only).
NEXT (
4
) If the menu selection is a value, pressing this key causes the value to
be incremented. If the menu selection is an option, pressing this key
allows selection among options on the current menu level. Holding the
key down causes the key to repeat at about seven times a second
(offline mode only).
UP+DOWN
(
5
+
6
)
Simultaneously pressing these keys unlocks or locks the printer menu
(offline mode only). This is the default key combination for locking/
unlocking the secondary control panel. You can change the key
combination. See page 72.
NEXT+PREV
(
4
+
3
)
Simultaneously pressing these keys enables a printer soft reset (offline
mode only).