Printronix T4204 - Manual (Page 145)

LinePrinter Plus Epson FX Emulation
145
LinePrinter Plus Epson FX Emulation
Define CR Code
The Define CR Code option controls the action of the printer when it receives
a Carriage Return code (hex 0D) from the host computer. If this feature is
enabled, each time the printer receives a Carriage Return, it inserts an
additional Line Feed code (hex 0A) into the data stream. Do not use this
feature if the host computer sends Line Feeds to the printer.
• CR = CR. Does not insert an extra Line Feed after each Carriage Return.
• CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Auto LF
This option defines the printer actions when print data is received past the
forms width setting.
• Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
• Disable. Discards any data past the forms width.
Printer
Protocol
(from page 125)
Define CR
Code
Auto LF Define LF
Code
Printer Select Character Set 20 CPI
Condensed
CR = CR*
CR = CR + LF Enable*
Disable LF = LF*
LF = CR + LF Disable*
Enable (see page 147) Enable*
Disable
* = Factory Default
Epson FX
Alt. Set 80-9F
Control Code*
Printable