Printronix T4204 - Manual (Page 56)

56
Chapter 3 Menu Navigation
NOTE: The lock and unlock function can be configured to be other than the
UP and DOWN keys. (See “Set Lock Key” on page 72.)
IMPORTANT This change takes effect for all subsequent data and operations for the
printer only after the printer is placed in the Online mode. The
configuration change(s) stay in effect only while the printer is powered
on. When the power is turned off, all current configuration data are lost
unless you save the configuration.
To save configuration information permanently or to select it as the power-up
default, see page 57.
Changing Printer Settings
1. Make sure the printer is offline. If the ONLINE indicator is lit, press the
PAUSE key. The following message will display:
2. Press
3
or
4
key for the following display.
3. Press the
6
key for the following display:
4. Press
3
or
4
to cycle through these options:
Page Width
Page Length
Print Speed
Print Intensity
Print Mode
Media Sensor
Media Handling
Paper Feed Shift
Hor Image Shift
Ver Image Shift
Calibrate
Tear-Strip Time
Clip Page
Error Recover
OFFLINE
CONFIG CONTROL
OFFLINE
PRINTER CONTROL
PRINTER CONTROL
Page Width