Printronix T4204 - Manual (Page 155)

Coax Emulation Menu
155
Position Aft FF (4234 only)
Allows you to select the location of the print position after a form feed
command is sent.
• Off. Sets the printer to print at position 2 of the first print line on the next
form.
• On. Sets the printer to print at print position 1 of the first print line on the
next form.
Last Char = FF
Determines the print line position when a form feed command is the last code
encountered in the print buffer.
• On. Moves to the first print position on the second line of the next form.
• Off. Moves to the first print position on the first line of the next form.
NOTE: This option is ignored if Auto Skip At End is on.
If configured as a 3287, and a form feed occurs in the middle of a print buffer,
the printer defaults to the first print position on the second line of the next
form, regardless of the setting of this option.
Null Suppression
• Off. Ignores nulls. The print position does not move.
• On. Treats nulls as spaces.
FF Validity
Determines if the position of a form feed command affects its execution.
• Off. Performs a form feed only if it occurs at the first print position in a line
or at Maximum Print Position +1. A form feed command at any other
position is recognized as a space.
• On. Allows the printer to perform a form feed command anywhere in the
data stream.
Auto Skip At End
Specifies whether to perform an automatic form feed at the end of a print
buffer. If form feed is the last character in the print order, the form feed
function is supplied by the Auto Skip At End option.
• Off. Sets the printer to print at print position 1 of the next line.
• On. Sets the printer to print at print position 1 of the first line of the next
form.