Printronix P9000 Series - Manual (Page 47)

3-7 Configuration
Control Panel Configuration Diagram
The Control Panel Configuration Diagram is a series of block diagrams that show the configuĆ
ration menus and the parameters (values) available within each menu. The boxes represent the
message display, the message that appears on the display is printed inside the box, and the letĆ
ters outside the boxes adjacent to the directional arrows represent control panel switches.
When a switch is pressed, an arrow leads to the displayed result of pressing that switch. The
symbols used on the Control Panel Configuration Diagrams are summarized in Figure 3-2.
The diagram is presented in 3 levels, each level illustrating a particular set of parameter menus
and values. The relationships between the three levels are summarized in Figure 3-3.
Level I - Print Format
Line Spacing
Print Mode
Forms Length Set
Level II - Main Configuration Menus
Ribbon Life xxx % Host Interface
Character Set Load Parameters
Application Compatibility Save Parameters
Paper Format Diagnostics
Level III - Configuration Menu Parameters
New Ribbon Set Ribbon Size
Set Job Rate When Worn Action
Analyze Job Ribbon Life Enable/Disable
Select Set IBM PC Select Set ECMA 94 Latin 1
Select Set Multinational Select Set DEC Multinational
Printer Protocol Unidirectional
Buffer Size Select SFCC
Printer Select Control Code 06
Paper Advance Switch Control Code 08
80 - 9F Hex Overstrike
Power-On State Display Language
Alarm On Fault