2 ip tos
Page 95

Administrator Guide - SoundPoint

IP / SoundStation

Optimization

4.6.1.7.1.3 Other

These default parameter values are used for all packets which are not set explicitly.

4.6.1.7.2 IP TOS

These settings control the “type of service” field in outgoing packets.

4.6.1.7.2.1 RTP

These parameters apply to RTP packets.

Attribute

Permitted
Values

Default

Interpretation

qos.ethernet.other.user_priority

0-7

User-priority used for packets that
do not have a per-protocol setting.

Attribute

Permitted
Values

Default

Interpretation

qos.ip.rtp.min_delay

0, 1

If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.max_throughput

0, 1

If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.max_reliability

0, 1

If set to 1, set max-reliability
bit in the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.min_cost

0, 1

If set to 1, set min-cost bit in
the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.precedence

0-7

If set to 1, set precedence bits
in the IP TOS field of the IP
header, or else don’t set them.

Page 95