Polycom Version 1.4.x 17 - Manual (Page 114)

Administrator Guide - SoundPoint ® IP / SoundStation
®
IP Optimization
106 Copyright © 2004 Polycom, Inc.
log task is controlled by a unique attribute set starting with log.sched.x where x identi-
fies the task.
4.6.1.17 Security
These settings affect security aspects of the phone.
4.6.1.17.1 Password Lengths
Attribute
Permitted
Values
Interpretation
log.sched.x.name alphanu-
meric string Name of an internal system command to be periodically
executed. To be supplied by Polycom.
log.sched.x.level 0-5 Event class to assign to the log events generated by this
command. This needs to be the same or higher than
log.level.change.slog for these events to appear in the log.
log.sched.x.period positive
integer Seconds between each command execution. 0=run once
log.sched.x.startMode abs, rel Start at absolute time or relative to boot.
log.sched.x.startTime positive
integer OR
hh:mm Seconds since boot when startMode is rel or the start time in
24-hour clock format when startMode is abs.
log.sched.x.startDay 1-7 When startMode is abs, specifies the day of the week to
start command execution. 1=Sun, 2=Mon, ..., 7=Sat
Attribute
Permitted
Values
Default Interpretation
sec.tagSerialNo 0, 1 0 If set to 1, the phone may advertise its serial num-
ber (Ethernet address) via protocol signaling.
Attribute
Permitted
Values
Default Interpretation
sec.pwd.length.admin 0-32 1 Password changes will need to be at least
this long. Use 0 to allow null passwords.
sec.pwd.length.user 0-32 2