Polycom Version 1.4.x 17 - Manual (Page 135)

Administrator Guide - SoundPoint ® IP / SoundStation ® IP Optimization
Copyright © 2004 Polycom, Inc. 127
4.6.3.4.1 Digit Map
4.6.3.4.2 Routing
This configuration section allows specific routing paths for outgoing SIP calls to be
configured independent of other ‘default’ configuration.
4.6.3.4.2.1 Server
Attribute
Permitted
Values
Default Interpretation
dialplan.x.digitmap string compatible with
the digit map feature of
MGCP described in
2.1.5 of RFC 3435;
string is limited to 512
bytes and 20 segments; a
comma is also allowed;
when reached in the
digit map, a comma will
turn dial tone back on. Null When present, this attribute
overrides the global dial
plan defined in the sip.cfg
configuration file.
For more information, see
4.6.2.1.3.5 Conference
Setup on
page 118.
dialplan.x.digitmap.timeOut positive integer Null When present, and if dial-
plan.x.digitmap is not Null,
this attribute overrides the
global dial plan defined in
the sip.cfg configuration
file.
For more information, see
4.6.2.1.3.5 Conference
Setup on
page 118.
Attribute Permitted Values Default Interpretation
dialplan.x.rout-
ing.server.y.address dotted-decimal IP
address or host name Null IP address or host name
and port of a SIP server
that will be used for
routing calls. Multiple
servers can be listed
starting with y=1, 2, ...
for fault tolerance.
dialplan.x.rout-
ing.server.y.port 1 to 65535 5060