10 call handling configuration Page 100
Page 100
Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP
Optimization
92
Copyright © 2004 Polycom, Inc.
4.6.1.10 Call Handling Configuration
Attribute
Permitted
Values
Default
Interpretation
call.rejectBusyOnDnd
0, 1
1
If set to 1, reject all incoming calls with
the reason “busy” if do-not-disturb is
enabled.
call.enableOnNotRegistered
0, 1
1
If set to 1, calls will be allowed when the
phone is not successfully registered, other-
wise, calls will not be permitted without a
valid registration.
call.offeringTimeOut
positive
integer
60
Time in seconds to allow an incoming call
to ring before dropping the call, 0=infi-
nite
a
.
a. The call diversion, no answer feature will take precedence over this feature if enabled. For
more information, see 4.6.3.3.3 No Answer
call.ringBackTimeOut
positive
integer
60
Time in seconds to allow an outgoing call
to remain in the ringback state before
dropping the call, 0=infinite.
call.lastCallReturnString
string of
maximum
length 32
*69
The string sent to the server when the user
selects the “last call return” action.
call.callWaiting.prompt
0, 1
0
If set to 1, an incoming call received when
another call is active will change the User
Interface focus (call appearance and soft
keys).
call.shared.disableDivert
0, 1
1
If set to 1, disable diversion feature for
shared lines.
call.shared.seizeFailReorder 0,
1
1
If
set
to 1, play re-order tone locally on
shared line seize failure.
call.shared.one-
TouchResume
0, 1
0
If set to 1, when a shared line has a call on
hold the remote user can press that line
and resume the call. If more than one call
is on hold on the line then the first one will
be selected and resumed automatically.
If set to 0, pressing the shared line will
bring up a list of the calls on that line and
the user can select which call the next
action should be applied to.