2 incoming signaling validation – Polycom Version 1.4.x 17 User Manual
Page 63
Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP
Features
Copyright © 2004 Polycom, Inc.
55
user password is requested, the administrator password will also work. The web
server is protected by the administrator password.
3.8.2 Incoming Signaling Validation
Three optional levels of security are provided for validating incoming network signal-
ing:
• source IP address validation
• digest authentication
• both
Central
(boot
server)
Configuration file:
ipmid.cfg
Specify the minimum lengths for the user and administrator
passwords.
•
For more information, see 4.6.1.17.1 Password Lengths
Local
Web Server
(if enabled)
None.
Local Phone User
Interface
The user and administrator passwords can be changed under
the Settings menu. Passwords can consist of ASCII charac-
ters 32-127 (0x20-0x7F) only.
Changes are saved to local flash but are not backed up to
<Ethernet address>-phone.cfg on the boot server for secu-
rity reasons.
Central
(boot
server)
Configuration File:
sip.cfg
Specify the type of validation to perform on a request-by-
request basis, appropriate to specific event types in some
cases.
•
For more information, see 4.6.2.1.3.3 Request Valida-
tion
Local
Web Server (if
enabled)
None.
Local Phone User
Interface
None.