2 user preferences Page 77
Page 77
Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP
Optimization
Copyright © 2004 Polycom, Inc
69
In the following table, x is the index of the region as specified by the x index of the
lcl.cpt.menu.x attribute above, y is the chord set number and cat is one of cp or misc.
For more information, see 4.6.1.5.1.1 Call Progress Patterns on page 75.
4.6.1.2 User Preferences
Attribute
Permitted
Values
Interpretation
lcl.cpt.chord.cat.x.y.freq.z
0-1600
Frequency for this component in Hertz; up to four
chord-set components can be specified (z=1, 2, 3,
4).
lcl.cpt.chord.cat.x.y.level.z
-57 to 3
Level of this component in dBm0.
lcl.cpt.chord.cat.x.y.onDur
positive
integer
On duration in milliseconds, 0=infinite.
lcl.cpt.chord.cat.x.y.offDur
positive
integer
Off duration in milliseconds, 0=infinite.
lcl.cpt.chord.cat.x.y.repeat
positive
integer
Specifies how many times the ON/OFF cadence
is repeated, 0=infinite.
Attribute
Permitted
Values
Default
Interpretation
up.headsetMode
0,1
0
If set to 1, the headset will be selected as
the preferred transducer after its first use
until the headset key is pressed again;
otherwise, handsfree will be selected
preferentially over the headset.
up.useDirectoryNames
0,1
0
If set to 1, the name fields of directory
entries which match incoming calls will
be used for caller identification display
and in the call lists instead of the name
provided via network signaling.
up.oneTouchVoiceMail
0, 1
0
If set to 1, the voicemail summary dis-
play is bypassed and voicemail is dialed
directly (if configured).
up.welcomeSoundEnabled
0, 1
1
If set to 1, play welcome sound effect
after a reboot.
up.welcomeSoundOnWarm-
BootEnabled
0, 1
0
If set to 1, play welcome sound effect on
warm as well as cold boots, otherwise
only a cold boot will trigger the wel-
come sound effect.