beautypg.com

22 customizable fonts and indicators – Polycom Version 1.4.x 17 User Manual

Page 41

background image

Administrator Guide - SoundPoint

®

IP / SoundStation

®

IP

Features

Copyright © 2004 Polycom, Inc.

33

function. For more information, see 5.2.5 Bridged Line Appearance Signaling on
page 139.

Note: In the configuration files, bridged lines are configured by “shared line” parame-
ters.

3.1.22 Customizable Fonts and Indicators

The phone’s user interface can be customized by changing the fonts and graphic icons
used on the display and the LED indicator patterns. Pre-existing fonts embedded in
the software can be overwritten or new fonts can be downloaded. The bitmaps and bit-

Central
(boot
server)

Configuration file:
ipmid.cfg

Specify whether diversion should be disabled on shared
lines.

For more information, see 4.6.1.10 Call Handling
Configuration on page 92.

Configuration file:
phone1.cfg

Specify per-registration line type (private or shared) and
the shared line third party name. A shared line will sub-
scribe to a server providing call state information.

For more information, see 4.6.3.1 Registration
on page 121.

Specify per-registration whether diversion should be dis-
abled on shared lines.

For more information, see 4.6.3.3 Diversion
on page 124.

Local

Web Server
(if enabled)

Specify per-registration line type (private or shared) and
third party name, and whether diversion should be dis-
abled on shared lines. Navigate to:

http:///reg.htm

Changes are saved to local flash and backed up to <Ether-
net address
>-phone.cfg on the boot server. They will per-
manently override global settings unless deleted via the
Reset User Settings menu selection.

Local Phone User
Interface

Specify per-registration line type (private or shared) and
the shared line third party name using the SIP Configura-
tion menu. Either the Web Server or the boot server con-
figuration files or the local phone user interface should be
used to configure registrations, not a mixture of these
options. When the SIP Configuration menu is used, it is
assumed that all registrations use the same server.