21 bridged line appearances – Polycom Version 1.4.x 17 User Manual

Page 40

Administrator Guide - SoundPoint

IP / SoundStation

Features

3.1.21 Bridged Line Appearances

Calls and lines on multiple phones can be logically related to each other. A call that is
active on one phone will be presented visually to phones which share that line. Mutual
exclusion features emulate traditional PBX or key system privacy for shared calls.
Incoming calls can be presented to multiple phones simultaneously. This feature is
dependent on support from a SIP server which binds the appearances together logi-
cally and looks after the necessary state notifications and performs an access control

Local

Web Server
(if enabled)

Specify line-seize subscription period. Navigate to:

http:///appConf.htm#se

Specify standard or non-standard behavior for processing
line-seize subscription for mutual exclusion feature. Nav-
igate to:

http:///appConf.htm#ls

Specify per-registration line type (private or shared) and
line-seize subscription period if using per-registration
servers, and whether diversion should be disabled on
shared lines. Navigate to:

http:///reg.htm

Changes are saved to local flash and backed up to <Ether-
net address>-phone.cfg on the boot server. They will per-
manently override global settings unless deleted via the
Reset User Settings menu selection.

Local Phone User
Interface

Specify per-registration line type (private or shared) using
the SIP Configuration menu. Either the Web Server or the
boot server configuration files or the local phone user
interface should be used to configure registrations, not a
mixture of these options. When the SIP Configuration
menu is used, it is assumed that all registrations use the
same server.