4 dial plan Page 127
Page 127
Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP
Optimization
Copyright © 2004 Polycom, Inc.
119
4.6.2.1.4 Dial Plan
4.6.2.1.4.1 Digit Map
4.6.2.1.4.2 Routing
This configuration section allows the user to create a specific routing path for outgoing
SIP calls independent of other ‘default’ configuration.
Attribute
Permitted
Values
Default
Interpretation
dialplan.impossibleMatch-
Handling
0, 1 or 2
0
If set to 0, the digits entered up to
and including the point where an
impossible match occurred are sent
to the server immediately.
If set to 1, give reorder tone.
If set to 2, allow user to accumulate
digits and dispatch call manually
with the
Send
soft key.
dialplan.removeEndOfDial
0, 1
1
If set to 1, strip trailing # digit from
digits sent out.
Attribute
Permitted Values
Default
Interpretation
dialplan.digitmap
string compatible with
the digit map feature
of MGCP described in
2.1.5 of RFC 3435.
String is limited to 512
bytes and 20 seg-
ments; a comma is
also allowed; when
reached in the digit
map, a comma will
turn dial tone back on.
[2-9]11
|0T|
011xxx.T|
[0-1][2-
9]xxxxxxxxx|
[2-9]xxxxxxxxx|
[2-9]xxxT
When this attribute is
present, number-only
dialing during the setup
phase of new calls will
be compared against the
patterns therein and if a
match is found, the call
will be initiated automat-
ically eliminating the
need to press Send.
dialplan.digitmap.timeOut
positive integer
3
Timeout in seconds for
‘T’ feature of digitmap.