Paradyne T1 T1 Access Mux 926x User Manual
Page 324

Index
IN-8
9161-A2-GH30-30
April 1998
S
saving configuration options, 5-6
screen
work areas, switching between, 4-8
Secondary, Clock Failure Alarm, 5-51
security, 1-10, 4-3, 5-4, 8-3
selecting
Self-Test Results, Messages, 7-22
Send All Ones on Data Port Not Ready, 5-19
Send All Ones on DSX-1 Failure, 5-15
Send Pattern
serial, APM number, 7-2
serial number, NAM, 7-1
Session
Session Access Level, 5-62, 6-3
set
Communication Protocol options, 5-67
Management and Communication options, 5-67
setting up
Signaling, force and monitor, 9-35
Signaling Type
Slot Assignment information, 7-10
SNMP
assigning community names/access levels, 6-6
limiting access through IP addresses, 6-7
MIB to User Interface Command Cross-Reference,
System Identification Information, 7-12
setting up for, 5-70
SNMP MIB object test commands, 1-9
SNMP NMS Security, setting up, 5-72
SNMP NMS Security options, 5-72
SNMP Trap options, 5-75
SNMP Traps, 5-75
software
Spacebar, 4-5
specifications, technical, F-1
selecting performance intervals for display, 7-14