Paradyne T1 T1 Access Mux 926x - Manual (Page 184)

2–
OK
OK
ALM
TST
BKP
SIG
OOF
ALM
SIG
OOF
ALM
1–
OK
9161
IN
OUT
IN
OUT
IN
OUT
IN
OUT
NET
DSX
NET
MON
DSX MON
NETWORK
DSX
POR
T
496-15051
Test
Jacks
LEDs
Troubleshooting
9-2 9161-A2-GH30-30 April 1998
T1 NAM LEDs
General Status LEDs
Label Indication Color What It Means
OK Power and
Operational
Status Green ON – NAM has power and is operational.
OFF – NAM is in a power-up self-test, or there is a
failure.
CYCLING – The unit is in Minimum mode. Requires an
FTP download.
ALM System
Failure/
Self-Test Red ON – NAM has just been reset, or an error or fault
has been detected.
OFF – No failures have been detected.
TST Test Mode Yellow ON – Loopback or test pattern in progress, initiated
locally, remotely, or from the network.
OFF – No tests are active.
BKP Backup Yellow Not supported in this release. Remains off except during
a Lamp Test.