Paradyne T1 T1 Access Mux 926x - Manual (Page 271)

SNMP Cross-Reference
D-13 9161-A2-GH30-30 April 1998
Table D-1. SNMP MIB to User Interface Command Cross-Reference (13 of 16)
User Interface Command SNMP MIB Object
main/test/port (OCU) (continued): Set devOcuTestType to: With devOcuTestControl set to:
(continued)
Start Send 511 to User
Stop Send 511 to User
Start Send 2047 to User
Stop Send 2047 to User
Start Send All Zeros to User
Stop Send All Zeros to User
Start Send All Ones to T1
Stop Send All Ones to T1
Start Send 63 to T1
Stop Send 63 to T1
Start Send 511 to T1
Stop Send 511 to User
Start Send 2047 to T1
Stop Send 2047 to T1
Inject Error
Clear Monitor Error
Number of Errors Monitored
Number of Errors Injected
send511User running
send511User idle
send2047User running
send2047User idle
sendZerosT1 running
sendZerosT1 idle
sendOnesT1 running
sendOnesT1 idle
send63T1 running
send63T1 idle
send511T1 running
send511User idle
send2047T1 running
send2047T1 idle
Set devOcuSendControlInjectErr to inject
Set devOcuMonResultErrorCount
Read value from devOcuMonResultErrorCount
Read value from devOcuSendControlErrorCount