Paradyne T1 T1 Access Mux 926x - Manual (Page 167)

Displaying System Information
7-25 9161-A2-GH30-30 April 1998
Table 7-4. Test Status Messages (2 of 2)
Message What It Indicates
OCU DS-0 LB, Slot ss
Port p
An DS0 Loopback test is on the OCU-DP interface in
slot
ss, port p.
Voice DLB, Slot ss Port p A voice Digital Loopback (DLB) test is active on slot ss,
port p.
Voice ALB, Slot ss Port p A voice Analog Loopback (ALB) is active on slot ss, port p.
Voice LLB, Slot ss Port p A voice Line Loopback (LLB) test is active on slot ss,
port p.
Voice DRS, Slot ss Port p A voice Digital Reference (DRS) test is active on slot ss,
port p.
Voice Quiet, Slot ss Port p A voice quiet tone test is active on slot ss, port p.
Forced Signal, Slot ss
Port p
A forced signaling test is active on slot ss, port p.
Pttn Active, [Networkn] A pttn test (test patterns for Network 1 or Network 2 ) is
active on Network n.
Pttn Active, [DSXss-p] A pttn test (test patterns for the DSX-1 interface in slot ss,
port p) is active.
Pttn Active, [Slot ss Port p] A pttn test (test patterns for Sync Data port) is active on
slot ss, port p.
Mon Pttn, [Network n] A Monitor pttn (test patterns for the Network 1 or
Network 2) is active on Network n.
Mon Pttn, [DSXss-p] A Monitor pttn (test patterns for the DSX-1 interface in
slot ss, port p) is active.
Mon Pttn, [Slot ss Port p] A Monitor pttn (test patterns for the Sync Data port) is
active on slot ss, port p.
Lamp Test Active The Lamp Test is active, causing all LEDs on the T1 NAM
and APMs to blink.