Index, Numbers – Paradyne T1 T1 Access Mux 926x User Manual
Page 317
IN-1
9161-A2-GH30-30
April 1998
Index
Numbers
3 Amphenol plug-1 Amphenol plug, G-4
3 Amphenol plug-4 Amphenol plug, G-4
64KCC Loop OOF Alarm, OCU-DP, 5-34
A
Abnormal Station Code Alarm, OCU-DP, 5-33
Access
asynch terminal user interface, 4-1
Limiting Async Terminal Direct , 6-1
access, to user interface, resetting/restoring, 8-13
access carrier, 1-3
security, 4-3
Access Type, 6-8
Accessing the User Interface, 4-8
Action on Network Yellow Alarm, 5-19
adding, Identity information, 5-3
Alarm & Trap Dial-Out, 5-64
Alarm Indication Signal (AIS), 5-12, 5-16
Alternate Communication Port IP Address, 5-69
Alternate Communication Port Subnet Address, 5-69
Alternate Dial-Out Directory, 5-65
Amphenol plug-Amphenol plug, 25 pairs, G-4
Amphenol socket-Amphenol plug, 25 pairs, G-4
ANSI Performance Report Messages, 5-9
APM
E&M Voice, 1-5
FXO Voice, 1-5
FXS Voice, 1-5
OCU-DP, 1-6
channel bank replacement an additions, 3-7
T1 access unit with high speed data, 3-2
T1 access unit with high speed data & E&M, 3-3
T1 access unit with high speed data and APL, 3-4
T1 access unit with high speed data and drop &
T1 access unit with high speed data and FXS, 3-5
assign
community names and access levels, 6-6
IP addresses and subnet masks, B-7
Network interface timeslots, 5-43
async (asynchronous) terminal, interface, 4-3
async terminal, limiting access, 6-1
async terminal interface, direct management control,