Paradyne T1 T1 Access Mux 926x - Manual (Page 24)

OK
1-TST
2-TST
9109 OCU
POR
T
98-15926
6-TST
OK
1-TST
2-TST
3-TST
4-TST
5-TST
9109 OCU
POR
T
98-15927
About the T1 Access Mux
1-6 9161-A2-GH30-30 April 1998
H
The OCU-DP APM, which supports:
— Either two or six ports
— Speeds of 56 kbps and 64 kbps, as well as 4-wire
Switched 56
— Enterprise MIB for testing and some
configuration functions
See the 9109 OCU-DP Application Module (APM)
Installation Instructions for more information.
NOTE:
The following NAM I/O versions are required to use the
OCU-DP APM:
— SINGLE T1 NAM (870-3389-8000) for the
9161 Single T1 NAM
— DUAL T1 NAM (870-2585-8000) for the
9261 Dual T1 NAM
Features
The T1 access unit offers the following features:
H Upgradability. There are three housings to select from: 2-slot, 5-slot and
14-slot access carrier. You can start with a 2-slot housing, and move your
NAM and APM to a 5-slot housing at a later time. Only NAMs may be used in
a 14-slot housing.
— The 2-slot housing holds one NAM and APM pair.
— The 5-slot housing holds one NAM and up to four APMs, allowing
expansion capability as your network needs grow.
— As you need additional DTE or voice ports for your network applications,
you can add APMs.
H
Modular Design. Any NAM or APM can be physically removed from one
housing and moved to another.