Philips bSure 1 - Manual (Page 12)

Philips Multimedia Projector
12 English User guide cClear
3. Set up >
• Place the projector on a stable, level surface, out of direct sunlight and away from sources of
excessive dust, dirt, heat, water, moisture, vibration and strong magnetic fields.
• Allow sufficient cooling of the product by keeping all air inlets and outlets clear from
obstructions.
• Position the projector in such way that the viewers cannot watch into the projector light beam.
• Choose a screen size suitable for the number of viewers and the size of the room.
• Picture quality is best when you sit directly in front of the projector screen.
• The projector can be used for both front projection, rear projection and ceiling projection
applications. As default factory setting, the projector has been set up for front projection.You
can change to rear or ceiling projection via the ‘Mirror’ function in the ‘Picture’ menu.
• For more information on the projection properties of the projector, please check the
‘Projector Assistant’ programme on the CD-ROM.
1 Insert the mains lead into the projectors Mains inlet socket and connect it to the wall outlet.
– The Standby indicator lights up red, the projector is now in the Power/Standby mode.
2 Remove the lens cap.
3 Press the Standby button on projector or remote control to switch the projector on.
– The Standby indicator lights up orange.
– When the projection lamp is on, the Standby indicator lights up green and the start-up
screen appears for several seconds.
4 Press the Standby button to switch the projector back into the Power/Standby mode.
– The Standby Warning screen will appear for 20 seconds.
• The Standby Warning screen can be removed by pressing the OK button.
5 Press the Standby button again to confirm.
– The projector will now go into Power/Standby mode.
You can also press the Standby button twice in succession to switch the projector into Power/Standby
mode immediately.
Positioning the projector
and screen
Switching the projector on
and off
SCREEN
SCREEN
SCREEN
SCREEN
Front projection Ceiling front projection
Rear projection Ceiling rear projection
Menu OK AV
Mute Source
Stand by
Lamp
Temp
Menu OK AV Mute Source
Stand by
Lamp
Temp
LASER LASER
VOolume VOolume
OK Menu Menu
Standby Standby On On AV Mute AV Mute
Select Select Mode Mode Source Source
Mouse Mouse RIGHT RIGHT LEFT LEFT RIight RIight Left Left
6
XP cClear10 English (good) 24-07-2003 15:52 Pagina 12