You can change the display properties, such as resolution, palette options, and
brightness, using the Dome tab after the Dome C3 display is attached to the
Windows desktop. Otherwise, use Properties > Settings tab.

To determine screen assignments

Click Identify in the Settings tab to match screens to display controllers.

To set the resolution

Use the Resolution field on the Dome tab to set the resolution to portrait,
landscape, or

single desktop

. When you set the resolution for one display of

a dual-headed DX display controller, the second display assumes the
same resolution.

1 Log on with administrator privileges.

2 Right-click the desktop. Select Properties > Settings.

3 Select Default Monitor and Dome DX/PCI Properties from the Display list.

4 Check the selection box for Extend my Windows desktop onto this monitor.

5 Select Advanced > Dome.

6 Choose a resolution and palette option. Click Apply.

7 Click OK until you return to the desktop.

To set palette options

For more information on palette options, see “Palette Options” on

page 27

To set brightness

In the Brightness field of the DOME tab, slide the scroll box left or right, or use
the left and right arrows, to set brightness for each flat panel. (The default
brightness is 100%.) Click OK.

Screen assignments

Windows 2000 renumbers and
reassigns screens as you add them
to the configuration. Set resolutions
or preferences only after all display
controller and screens are installed.
Restart your system to make sure the
screen assignments are retained.

Resolutions and palettes

Set display properties on the Dome
C3 display using the resolutions and
palette options listed below. Note
that single desktop requires a dual
display system.

Resolutions available

1536 x 2048 portrait

2048 x 1536 landscape

3072 x 2048 single desktop, portrait

4096 x 1536 single desktop, landscape

Palette options

C3 gray display:

Dynamic gray

Nonlinear gray

Static gray

True color

C3 color display:

Color

True color