To clean the lcd screen, Shipping/storing the display, Symbol explanations – Planar C3 User Manual
Page 10
QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
APPENDIXES
x
Dome C3 Display
To clean the LCD screen
1
Unplug the power supply.
2
Dampen a clean, soft nonabrasive cloth with isopropyl alcohol.
3
Wipe the screen
gently
.
4
Dry the screen with a clean, soft nonabrasive cloth to remove any residue.
Shipping/storing the display
Keep the display in its shipping container until installation. Return the display to its
original container whenever you need to store the unit, move it to another location, or
return it for repair.
Before returning the display to the container for shipping or storing, do the following:
•
Swivel the display panel in portrait mode.
•
Push the panel down to the lowest position.
•
Use the stand lock to anchor the panel.
.Always transport the Dome C3i display in its original container. The packaging supplied
by the manufacturer protects the display from damage while it is in transit.
Symbol explanations
The following symbols may appear on the product or product packaging.
Barometric pressure
Relative humidity
Temperature
Maintenance tips
•
Use a clean, lint-free, absorbent
cotton cloth to clear off any
residual glue from removal of
the protective film.
•
Use a clean, lint-free, absorbent
cotton cloth to remove surface
dust. Apply light pressure to
remove the dust.
•
Dampen a clean cloth with
a small amount of isopropyl
alcohol to remove glue or dust
if the screen is still not clean. Use
a clean, dry cloth to completely
remove the alcohol residue.
•
Do not use chemically treated
dust cloths on the display case or
LCD screen.
•
Do not use acetone, toluene, or
harsh solvents. They can damage
the polarizer and display case.
•
Do not saturate the cleaning
cloth with alcohol. The alcohol
may seep into the display case
and collect in the enclosure.
•
Do not allow water or other
stains to stand on the unit.
Wipe these off immediately to
prevent damage to the display
case and screen.