The Dome C3 display system consists of a 528-mm (20.8-in.) TFT LCD panel and
a DX display controller and driver. The display’s thin film transistors (TFTs), in
a transmissive-type display, use an integrated cold cathode fluorescent tube (CCFT)
backlight system.

The display is designed for 3-megapixel (1536 x 2048) grayscale medical imaging in
diagnostic settings, in either portrait or landscape orientation. It comes fully tuned
with gamma correction that complies with the DICOM Part 14 Standard. An all-
digital design enables the display to produce the sharp, crisp images critical to
softcopy medical viewing. Unwanted analog display image artifacts, such as noise,
jitter, ghosting, and image smearing are eliminated.

The Dome C3 display is available as a color or grayscale panel. Each model offers
the following key features. See the

specification

for more information.

•

3061 distinct shades of gray

•

AMLCD technology for consistent image quality

•

Exceptional contrast ratio for viewing images in well-lit areas

• Accelerated hardware rotation for viewing images in portrait or landscape mode

• Calibrated to DICOM response curve

• Automated calibration and backlight stabilization through RightLight technology

The

Dome CXtra™ software

enhances the functionality of the Dome C3 display.

CXtra provides a range of value-added services, such as DICOM calibration,
error reporting, and backlight saver. Refer to the CXtra 3.0 User’s Guide for
more information.

Before installing the display system, review the

safety

and

installation precautions

Once your display system is in operation, follow the guidelines for

cleaning

and

servicing your unit.

Systems requirements

Computer system

PCI slot per board

50 MB hard disk space