beautypg.com

Paradyne 6342 User Manual

Page 51

background image

4. DSL Router Configuration Examples

6300-A2-GB20-10

November 2003

4-9

NOTES:

— When IP Scoping is enabled, Basic NAT is enabled and the dsl1 interface

is NOT part of the Basic NAT global IP network, only the dsl1 interface’s IP
address must be entered into the client VNID table.

— This configuration is only supported with firmware version 4.2.5 or higher.

— FUNI/MPOA (1483 routed) link encapsulation can be used with this

configuration and the DSL card Models 8304, 8314, 8344, and 8374. Link
encapsulation is configured on the DSL port. This link encapsulation must
match the core network encapsulation type. The ip route create
upstream

and proxy arp dsl1 enable commands are not

necessary when using FUNI/MPOA link encapsulation.

This manual is related to the following products: