Paradyne 6342 - Manual (Page 118)

C. Traps and MIBs
C-4 November 2003 6300-A2-GB20-10
System Group
System Group objects are fully supported by the DSL router, as shown in
Table C-2, System Group Objects .
NOTE:
The System Name, System Contact, and System Location objects can be
configured via the port card (A-F). Values will display in Monitoring (B-E).
However, the DSL router uses and displays the SNMP information set via the
System Group.
Table C-2. System Group Objects (1 of 2)
Object Description Setting/Contents
sysDescr
(system 1) Provides a full name and
version identification for the
Hotwire system’s hardware
and software. The object is set to display a string in the following format:
PARADYNE Hotwire DSL; Model: xxxx-xx-xxx;
S/W Release: yyy.yy.yy; H/W Release: zzzz-zzz;
Serial Number: ssssssssssss; Boot: Bbb.bb.bb;
2nd Boot: Sxx.xx.xx; DSP: x.xx
Model starts with the 4-digit model number:
„ 6301 – IDSL router
„ 6302 – IDSL 4-port router
„ 6341 – SDSL router
„ 6342 – SDSL 4-port router
„ 6351 – ReachDSL router
„ 6371 – RADSL router
sysObjectID
(system 2) Identifies the network
management subsystem for
the DSL router. OIDs (Object Identifiers):
„ 6301 IDSL router – 1.3.6.1.4.1.1795.1.14.9.9.35
„ 6302 IDSL 4-port router – 1.3.6.1.4.1.1795.1.14.9.9.36
„ 6341 SDSL router – 1.3.6.1.4.1.1795.1.14.9.9.25
„ 6342 SDSL 4-port router – 1.3.6.1.4.1.1795.1.14.9.9.26
„ 6351 ReachDSL router – 1.3.6.1.4.1.1795.1.14.9.9.39
„ 6371 RADSL router – 1.3.6.1.4.1.1795.1.14.9.9.29
sysContact
(system 4) Provides the contact
information for the person
managing the DSL router. ASCII character string (32 characters), as set by the user:
„ badValue(3) – Field length exceeded.
sysName
(system 5) Provides a contact name for
the DSL router. ASCII character string (32 characters), as set by the user:
„ badValue(3) – Field length exceeded.
sysLocation
(system 6) Provides the physical location
for the DSL router. ASCII character string (32 characters), as set by the user:
„ badValue(3) – Field length exceeded.