Paradyne 6342 - Manual (Page 18)

1. Introduction to Hotwire DSL Routers
1-4 November 2003 6300-A2-GB20-10
„ Console Terminal Interface. Provides an interface for:
— Configuring and managing the DSL router
— Local console access
„ Management from an NMS using SNMP.
In addition, the following features are provided for the Hotwire 6351 ReachDSL
Router:
„ Telnet access to the Command Line Interface (CLI) in the service domain for
Network Service Provider (NSP) use.
„ TFTP client support for NSP service domain software downloads.
„ SYSLOG availability in the service domain.
„ Point-to-Point Protocol over Ethernet (PPPoE) client provided as defined in
RFC 2516.
„ Asymmetric maximum upstream/downstream setting.
Service Subscriber
The Service Subscriber is the user (or set of users) that has contracted to receive
networking services (e.g., Internet access, remote LAN access) for the end-user
system from an NSP (Network Service Provider). Service subscribers may be:
„ Residential users connected to public network services (e.g., the Internet)
„ Work-at-home users connected to their corporate intranet LAN
„ Commercial users at corporate locations (e.g., branch offices) connected to
other corporate locations or connected to public network services
A Hotwire DSL Router must be installed at the customer premises to provide the
end user with access to any of the above services.
NOTE:
If you would like more information on DSL-based services, applications, and
network deployment, refer to Paradyne’s The DSL Sourcebook. The book
may be downloaded or ordered through Paradyne’s World Wide Web site at
www.paradyne.com/library.