Paradyne 6342 - Manual (Page 24)

2. Accessing the DSL Router
2-6 November 2003 6300-A2-GB20-10
Using the List Command
The list command displays a sequence of commands in the form of ASCII strings
that would have the effect of setting all configuration settings to the current values.
Secure information such as passwords and login IDs are not displayed.
To determine the commands available, enter Administrator configuration mode
and type either:
„
list
Displays the output in on-screen page mode. In on-screen page mode, the
user interface displays 23 lines of information. When the 24th line is reached,
More...
appears. Pressing any key displays the next page.
„ list config
Displays the output in scroll mode as a text file. Scroll mode captures and
displays all command strings in a text file for use with a terminal emulation
program. Refer to
Appendix D, DSL Router Terminal Emulation .
Changing the System Identity
The System identity is the same as the MIB entry of sysName. The sysContact
and sysLocation MIB entries are not displayed.
Procedure
To change System identity from the factory default of CUSTOMER>:
1. Log in and enter ADMIN-configuration mode.
2. At the CUSTOMER-CONFIG#> prompt, type the new System identity
(no spaces allowed) and press Enter. Then type save and press Enter.
system identity new system identity
For example:
system identity PARADYNE
save
In this example, after saving the entry and ending configuration mode, the
System identity will display:
PARADYNE#>
Refer to Exiting from the System on page 2-7 to end configuration mode.