Paradyne 6342 - Manual (Page 141)

6300-A2-GB20-10 November 2003 IN-1
Index
Symbols
!, CLI display for every 10 packets received from the
server during file transfer, E-2
?, for determining commands available, 2-5
Numerics
802.3, Ethernet frame format, A-5
A
access control, 2-1
Address Resolution Protocol (ARP), 3-5
show timeout, A-24
Administrator access, 2-2
alarm
show command, 6-1, A-24
ARP, 3-5
show command, A-24
table, A-9
autologout, 2-8
B
basic
NAT
configuring, A-11
deleting static mapping, A-13
for DHCP server, 4-12
network configuration, 4-4
show NAT command, A-28
network configuration, 4-2
bridge
clearing statistics, A-23
commands, A-8
mode, 3-2
show command, A-25
statistics, 5-3, A-31
reasons for discarded frames, 5-7
C
clearing statistics, 5-3
command, A-23
Command Line Interface (CLI)
access, 2-3
capability, A-1
command recall, A-2
conventions used in command syntax, A-2
navigating, A-2
shortcuts, B-3
commands
available for access level, 2-5
bridge, A-8
DHCP relay agent, A-16
IP packet processing, A-17
PPPoE, A-18
show, A-24
Telnet, A-21
configuration
basic
bridging, 4-2
NAT, 4-4
routing, 4-3
DHCP
Relay with Proxy ARP, 4-11
server PPPoe Client with NAPT, 4-13
server with basic NAT, 4-12
downstream router, 4-14–4-15
dynamic host protocol (DHCP), A-14
factory default settings, B-1
hub, 3-2
IP passthrough, 4-15
NAPT, 4-6
overview, 3-1
unnumbered DSL interface with Proxy ARP, 4-10
configure
terminal, 2-3
console
access, 2-2
show command, A-25
conventions used in command syntax, A-2
core
network, 3-13
router, 3-3
create
destination ip route, A-7
upstream eth1 IP route, A-8
customer, system identity prompt, 2-3