Paradyne 6342 - Manual (Page 34)

3. Configuring the DSL Router
3-8 November 2003 6300-A2-GB20-10
Simultaneous Basic NAT and NAPT
Simultaneous Basic NAT and NAPT (or PAT) is supported. In this mode, the
servers (private IP addresses) using Basic NAT are configured and the devices
(private IP addresses) using NAPT are optionally configured (static mappings). If
not configured, the remaining private IP addresses default to NAPT.
Enabling Basic NAT does not disable NAPT. When both Basic NAT and NAPT are
enabled, Proxy ARP can also be enabled, although it is only used for Basic NAT.
Applications Supported by NAT
The DSL routers support the following applications and protocols:
„ FTP
„ HTTP
„ Ping
„ RealPlayer
„ Telnet
„ TFTP