Dsl router terminal emulation, Accessing the list command output, D dsl router terminal emulation – Paradyne 6342 User Manual

Page 135: Appendix d, dsl router terminal emulation

6300-A2-GB20-10

November 2003

D-1

DSL Router Terminal Emulation

The Command Line Interface is available at the DSL router when the Console
cable is connected to a VT100-compatible terminal or a PC running a terminal
emulation program. Verify the terminal settings:

Data rate is set to 19.2 Kbps (19200 bps).

Character length is set to 8.

Parity is set to None.

Stop bits is set to 1.

Flow control is set to Off or None.

Accessing the List Command Output

Use the list config command to output command strings needed to restore
the current running configuration. Output from the List Confg command can be
captured to a text file using most terminal emulation programs. Examples of two
VT100-compatible programs are provided.

Once the text file is captured, the DSL router can be placed in configuration mode.
The text file can be fed back to configure the DSL router.

This manual is related to the following products:

6351 6341