Paradyne 6342 User Manual
Page 128
C. Traps and MIBs
C-14
November
2003
6300-A2-GB20-10
applTestErrorCode
(testStatusEntry 4)
Contains additional test details,
such as error codes.
Test Error codes:
none – No errors.
timeout
icmpError
systemError
applTestOwner
(testStatusEntry 5)
Identifies who started the test.
1 – 40 characters.
applTestRowStatus
(testStatusEntry 6)
Use to create a new row or delete
an existing row.
Set to active(1) to create a new row.
applPingTestId
(applpingTestEntry 1)
Contains identifier that allows the
Network Manager to view the
results of Ping and TraceRoute
tests.
Device supports only one at a time.
applPingTestIpAddress
(applpingTestEntry 2)
Identifies IP address to be pinged. Set destination IP address.
applPingTestSourceIpAddress
(applpingTestEntry 3)
Identifies the source IP address.
Set source IP address.
applPingTestPacketSize
(applpingTestEntry 4)
Specifies Ping packet size. Range
includes 28 bytes of header
information.
28 – 15028 – Range.
64 – Default.
applPingTestTimeout
(applpingTestEntry 5)
Number of seconds between
echo request attempts.
10 – Default.
applPingTestMaxPings
(applpingTestEntry 6)
Maximum number of Pings.
1 – Only supported value.
applPingTestPktsSent
(applpingTestEntry 7)
Number of packets sent.
1 – Only supported value.
applPingTestPktsRecv
(applpingTestEntry 8)
Number of packets received
without error.
0
1
applPingTestMinTime
(applpingTestEntry 9)
Minimum roundtrip time.
0 – Not supported.
applPingTestMaxTime
(applpingTestEntry 10)
Maximum roundtrip time.
0 – Not supported.
applPingTestAvgTime
(applpingTestEntry 11)
Average roundtrip time.
0 – Not supported.
applPingTestDomain
(applpingTestEntry 12)
Specifies the destination IP
address’s domain as
management or service. If the
source IP address is entered,
mgmt(2) is not valid.
mgmt(2) – Management domain.
service(3) – Service domain.
applPingTestIfIndex
(applpingTestEntry 13)
Specifies the interface over which
the Ping will take place.
Defaults to the interface based upon current
routing.
Table C-8.
Application Test Group Objects (2 of 3)
Object
Description
Setting/Contents