Editing and saving a configuration option – Paradyne 3810 User Manual

Page 67

Configure Branch

9-5

3810-A2-GB30-20

November 1996

The Configure branch consists of the following three

levels:

•

Ld EditArea frm. Allows the selection of the
Active (Operating), Active (Saved), Customer 1,
Customer 2, and Factory configuration areas.

•

Choose Function. Allows you to make changes
(Edit) to existing configuration options or write
(Save) these changes to either the Active (Saved),
Customer 1, or Customer 2 configuration area.

•

Edit Strap Group. Contains the eight software
configuration option groups that determine how the
modem operates.

Editing and Saving a Configuration Option

The following example shows how to change the

Remote Access Password using the DCP. (If you ever
intend to access another 3800 Series modem via the
Remote branch of the Top-Level menu, the Remote
Access Password must be the same for both modems.) By
following these procedures you learn how to load a
factory preset configuration area (in this case, Async
Dial), how to edit a configuration option (Remote Access
Password), and how to save changes to a configuration
area (Active (Saved)). The shaded key indicates what key
to press.

Idle : 19.2
Test Configure

Select Configure from the Top-Level menu.

LdEdit Areafrm

Activ (Operating)

LdEdit Areafrm

Activ (Operating)

Select the Factory configuration area.

Ld Fact Preset :

Async_Dial

Select Async_Dial.

Choose Function
Edit Save

Select Edit.

Edit StrapGroup

DTE_Interface

Edit StrapGroup

Tests Misc

Scroll across the LCD and select the Misc

configuration options group.

StrapsWhenDisc >
Nxt No_Change

RemAccssPasswrd
Nxt

ąĄ°00000000