Paradyne 3810 - Manual (Page 178)

COMSPHERE 3800 Series Modems
E-4 November 1996 3810-A2-GB30-20
VF Connector Pin
Assignments
Tables E-3 and E-4 list the connector pin assignments
for Model 3810 and Model 3820 modular jacks and the
pin assignments for the TELCO jacks. For 2-wire
leased-line connections to a JM8 network interface, an
8-position to 6-position crossover cable (see Figure E-1)
must be used according to the following FCC
requirements:
‘‘The RJ series of jacks should not be used for
connecting data equipment to nonswitched private line
networks – specifically, the service equivalents of the
pre-divestiture Series 3002 (Category II, Tariff #260)
service. There is a substantial difference in transmit levels
permitted in the private line service and those permitted in
the public switched network. The industry standard is now
an 8-pin keyed modular jack known as the USOC JM8
(Bellcore Technical Reference: TR-EOP-000242, Issue 1,
released May 1985.) When ordering the installation of the
USOC JM8, specify the appropriate wiring options:
1. 2- wire operations
2. 4-wire operations w/o TEK leads
3. 4-wire operations with TEK leads
TEK leads are for loopback purposes.
A 50-pin version is being considered for multiple line
connections.”
Insert the 6-position plug into the LEASED jack of
your modem. Insert the 8-position plug into the
leased-line network interface.
Figure E-1. Wiring Diagram – 8-Position to 6-Position Crossover Cable